PK RIPPER SUPER ELITE FRAME

By far, the most advanced PK Ripper frame of all time. The PK Ripper Super Elite frame with a 20.5” top tube comes equipped with features such as a tapered headtube, PF30 bottom bracket, and 20mm dropouts. Match it up with high-end race parts of your choice and you will surely smoke the competition.

  • Lightweight 6066 aluminum frame built with floval top tube, bi-oval down tube, 1-1/8” – 1.5” tapered head tube, tapered rear stays, 20mm 3-D forged rear dropouts with built-in chain tensioners and PF30 bottom bracket for maximum stiffness
  • Cr-Mo Landing Gear forks featuring tapered legs and closed-end dropouts
  • Comes equipped with three different sets of chain tensioner plates to accept hubs with 20mm, 15mm or 3/8” axles
  • Sealed Tange integrated headset equipped with both 1.5” fork race and 1-1/8” conversion fork race. So the frame will accept standard 1-1/8” forks or tapered steer tube forks.
  • Promax QR-1 quick release seat clamp
  • FSA sealed bearing integrated headset
  • Includes SE Racing number plate
  • 3.3 lbsFrame Weight

COLOR(S)Red
FRAMESuper Elite Design, Lightweight 6066 Aluminum Floval Tubing w/ Bi-Oval Down Tube, 1-1/8"-1.5" Tapered Integrated Head Tube, PF30 Bottom Bracket, 68mm Wide BB, Tapered Rear Stays, 3D 20mm Dropouts, Built-in Chain Tensioners
FORKSuper Elite Landing Gear, Full Cr-Mo, Tapered Steerer Tube, Tapered Legs, 20mm Closed Dropouts
HEADSETFSA NO.42/ACB-A Sealed 1-1/8"-1.5" Tapered, Integrated Headset
ACCESSORIES20mm, 15mm & 3/8" Chain Tensioner Adapters Included, SE Racing Number Plate, Promax QR-1 Quick Release Seat Clamp
WEIGHTFrame 3.4 lbs / 1.54 kgs. Fork 2.5 lbs / 1.13 kgs
*Spec subject to change without notice
TOP TUBE, ACTUAL 20.5"
SEAT TUBE, CENTER TO TOP9.5"
SEAT TUBE ANGLE 71°
HEAD TUBE ANGLE 74°
CHAINSTAY LENGTH14.3"
WHEELBASE37"
BOTTOM BRACKET HEIGHT 11.5"
STANDOVER22.122.3"
SUGGESTED RIDER SIZE 5'3"-5'10" (160-178cm)
STEM53mm
HANDLEBAR WIDTH28.5"
CRANK175mm
WHEEL SIZE20"
SEAT POST DIAMETER27.2mm
Like It Then Share It: